Payment & Shipping Terms:
|Material:||Casted Stainless Steel SS304 And 316L||Port Size:||1/2" - 4"; DN15-DN100|
|Connection Ends:||Clamp, Thread, Butt Weld||Sealing Mode:||Ball Core Completely Encapsulated|
|Medium:||Lever.Pneumatic Actuator,Electric Actuator||Media:||Water,Oil&Gas|
|Temperature:||Normal Temperature||Application:||Industrial Usage|
2 piece body Hygienic sanitary tri clamped two way ball valve,304,Full Bore,polished
|Ball Valve Type:||Direct way ball valve,butterfly type ball valve,3pc ball valve|
|Operation Way:||Manual,Pneumatic and Electric actuator|
|Control Head:||C-TOP controller,sensor|
|Working Temperature:||-10°C to +120°C|
|Packing Method:||Bubble pack for each valve. Outside packing are carton or plywood cases. Or as per the request of customers.|
|Shipment Way:||By express,by air or by sea,as customer request|
|Delivery Detail:||Usually 10-15days after order confirmed|
|Application Scope:||Dairy, food, beer, beverage, pharmacy, cosmetic, water etc|
CX FLUID 3-piece sanitary ball valve with ISO direct mounting pad is designed for food biological, pharmaceutics or similar industries. The cavity filled seat option will help not to remain the media in the body cavity to keep from spoiling or mixing. Cavity filler seats will also help to clean the valve port easily.
The options on end types can be T-Clamp, Tube weld end, Extended tube weld end. Different material of soft kits will be applicable for different working circumstance.
ASME/ BPE (for SS316L) standard are available on 302SD, with low ferrite ( 3%), and low sulphur (0.005% to 0.017%). The finish are available for Ra 40 uin or Ra 25 u-in.
The standard bare stem type is well designed for mounting actuator directly.
CX FLUID offer pneumatic/ electric actuator and limit switch box/ solenoid valve/ modulating controller....assembling without further charge.
1.Small fluid resistance, the same length of pipe section have equal resistance coefficient
2.Simple construction,small volume,light weight.
3.Easy operation,open and close quickly,from fully open to fully close just need rotate 90° for easy remote control
4.convenient maintenance,ball valve has simple construction,the sealing is usually moveable,that easy to disassemble and replace.
5.When fully open or fully close,the sealing surface of sphere and valve seat is isolated from medium,It will not cause the valve sealing surface erosion when the medium passing.
6.Wide range of application,Sizes range from a few millimeters to a few meters, from high vacuum to high pressure all can use.
Note:piece type ball valve can't adjustable.valve is normally open or normally closed.
The design of the high platform is completely in accordance with standard ISO5211 and DIN3337, because ISO5211 specifies the dimensions of the mounting pad and the dimensions of the square axis of the actuator, DIN3337 defines the 45° direction for the square axis of the actuator
Manual and pneumatic replacement
Manual change to pneumatic,just need take off the handle,Install pneumatic head,It's easy to operate.
1. Three detachable valve body parts as showed in below pictures. This design brings much more convenience of disassembly any time compared to common type ball valves
2. The encapsulated bore core structure helps achieve non-retention, no leakage, no dead leg area. In below picture, the left one is full port package type, and the right is standard sealing type.
Our Competitive Advantages:
1. We have over 15 years of experience in manufacturing high quality pipeline valves
2. OEM, ODM welcome, we can produce according to your drawings and samples
3. Sample order accepted
4. We prepare stock for most standard models to achieve fast delivery time
5. We provide best quality at a reasonable price
Operated by: Manual handle, or pneumatic actuator
Medium: Water, gas, milk, drinks, pharmacy, chemical fluids, cosmetics, and so on
Port Size: DN15~DN100, 1/4" ~ 4"
Working Temperature: -10 ~ +150 degress centigrade
Max. W.P.: 8 bar
Max. Pressure withstand: 10 bar
Material: SUS / AISI 304, 316L stainless steel and PTFE sealing gasket
Connection Ends: Thread, clamp, butt-weld, flange, union
Contact Person: sales